Navigation

Veröffentlichungen

2019

B. Kohlhepp et al. (2019) - Measuring of Dynamic On-State Resistance of GaN-HEMTs in 
Half-Bridge Application under Hard and Soft Switching Operation, 
2019 IEEE Canada Electrical Power and Energy Conference (EPEC 2019), Oct. 2019, 
Montreal, Canada

E. Stenglein, D. Kübrich, M. Albach, T. Dürbaum (2019) Influence of Magnetic History and 
Accommodation on Hysteresis Loss for Arbitrary Core Excitations
21th European Conference on Power Electronics and Applications (EPE 2019 ECCE Europe), 
September 2019, Genova, Italy

B. Kohlhepp et al. (2019) Measuring and Modeling of Dynamic On-State Resistance of 
GaN-HEMTs
21th European Conference on Power Electronics and Applications (EPE’19 ECCE Europe), 
Sept. 2019, Genua, Italy

P. Mantzanas, D. Kuebrich, T. Dürbaum (2019) Investigation of the DC-link Capacitor Current 
Ripple in Battery-fed PWM Inverter Systems 
21th European Conference on Power Electronics and Applications (EPE 2019 ECCE Europe), 
September 2019, Genova, Italy 

B. Kohlhepp et al. (2019) Influence of the Rectifier’s Output Capacitance on the ZVS Transition 
in Asymmetrical Half-Bridge PWM Converters 
10th International Conference on Power Electronics – ECCE ASIA, May 2019, Busan, South Korea 

F. Hubert, P. Dorsch, S. Rupitsch, T. Dürbaum (2019) A novel approach to reduce EMI in 
switched-mode power supplies operating at fixed switching frequencies 
PCIM Conference, May 2019, Nuremberg, Germany 

J. Dobusch T. Dürbaum (2019) Measuring Parasitic Resistance of Resonant Converters 
OutputCapacitor through Transfer Functions 
PCIM Conference, May 2019, Nuremberg, Germany 

B. Kohlhepp, M. Barwig, T. Dürbaum (2019) GaN Improves Efficiency of an Asymmetrical 
Half-Bride PWM Converte with Synchronous Rectifier  
PCIM Conference, May 2019, Nuremberg, Germany 

Exner, H. Roßmanith (2019) How to avoid inconvenient characteristics of hf litz wire  
ECPE Workshop: „New Technologies for Medium-Frequency Solid-State Transformers“ 2019, 
14.-15. Februar 2019, Lausanne, Switzerland 

P. Mantzanas, A. Bucher, D. Kübrich, A. Pawellek, C. Hasenohr, H. Hofmann, T. Dürbaum (2019) 
A Detailed Investigation of the DC-link Voltage Ripple in Battery-fed PWM Inverter Systems 
PCIM Conference, May 2019, Nuremberg, Germany 

E. Stenglein, A. Scheder, D. Kübrich, M. Albach, T. Dürbaum (2019) New Experimental Verification 
of Transformer Core Saturation Occurring in Forward Converters Due to Remanence Flux Density 
PCIM Conference, May 2019, Nuremberg, Germany 

E. Stenglein, D. Kübrich, M. Albach, T. Dürbaum (2019) Novel Fit Formula for the Calculation of 
Hysteresis Losses Including DC-Premagnetization 
PCIM Conference, May 2019, Nuremberg, Germany

2018

B. Kohlhepp, M. Barwig, T. Dürbaum (2018)
Improving Efficiency of an Asymmetrical Half-Bridge PWM Converter with Synchronous 
Rectification by a Modified Design Process
2018 International Conference and Exposition on Electrical And Power Engineering (EPE), October 2018, Iasi, Romania

J. Dobusch, P. Konarski, D. Kübrich, T. Dürbaum (2018)
Implementation of Voltage Based Three-Phase CM/DM Noise Separation on the Drive Side
2018 20th European Conference on Power Electronics and Applications (EPE’18 ECCE Europe), 
Sept. 2018, Riga, Latvia

J. Dobusch, D. Kübrich, T. Dürbaum, F. Diepold (2018)
Implementation of Current Based Three-Phase CM/DM Noise Separation on the Drive Side
2018 International Symposium on Electromagnetic Compatibility (EMC EUROPE), Aug. 2018, 
Amsterdam, Netherlands

E. Schmidt, T. Dürbaum (2018)
Fast converter simulation method including parasitic nonlinear capacitances
15th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and 
Applications to Circuit Designs (SMACD), Prag, Juli 2018

P. Mantzanas, M. Barwig, D. Kübrich, T. Dürbaum (2018)
Flyback converter with a stepped air-gap transformer
EPE Journal, Dezember 2018, doi: 10.1080/09398368.2018.1551989

B. Kohlhepp, M. Barwig, T. Dürbaum (2018)
Efficiency Comparison of an Asymmetrical Half-Bridge PWM Converter with Schottky and 
Synchronous Rectification
International Universities Power Engineering Conference (UPEC), September 2018, Glasgow, 
Scotland

M. Barwig, C. Oeder, M. Albach (2018)
Exact Analytical Solution of the Peak Gain for the LLC Resonant Converter
PCIM Conference, June 2018, Nuremberg, Germany

C. Oeder, N.Förster, T. Dürbaum (2018)
Implementation of an Adaptive Dead Time in Resonant Converters
PCIM Conference, June 2018, Nuremberg, Germany

C. Oeder, M. Barwig, T. Dürbaum (2018)
Predicting ZVS Behavior of Resonant Converters Using a Fast and Effective Calculation Method
PCIM Conference, June 2018, Nuremberg, Germany

C. Oeder, M. Barwig, J. Dobusch, T. Dürbaum (2018)
Accurate Prediction of Resonant Converters’ ZVS Behavior in the Time Domain
IEEE International Symposium on Circuits and Systems (ISCAS), May 2018, Florence, Italy

C. Kuring, J. Dobusch, T. Dürbaum (2018)
Calculation of Lipschitz constants enabling advanced root finding in electrical network simulation
19th IEEE Workshop on Control and Modeling for Power Electronics (COMPEL 2018), June 2018, Padova, Italy

E. Stenglein, H. Roßmanith, M. Albach (2018)
Macroscopic Modeling of MnZn Ferrites for the Calculation of Eddy-Current Losses in the 
Frequency- and Time-Domain
19th IEEE Workshop on Control and Modeling for Power Electronics (COMPEL 2018), June 2018, Padova, Italy

P. Mantzanas, A. Bucher, D. Kübrich, C. Hasenohr, A. Pawellek, H. Hofmann 
and T. Dürbaum (2018)
A Fast and Accurate Calculation Method for Predicting the DC-link Voltage Ripple in Battery-fed 
PWM Inverter Systems
19th IEEE Workshop on Control and Modeling for Power Electronics (COMPEL 2018), June 2018, Padova, Italy

E. Stenglein, D. Kübrich, M. Albach, T. Dürbaum (2018)
Guideline for Hysteresis Curve Measurements with Arbitrary Excitation: Pitfalls to Avoid and 
Practices to Follow
PCIM Conference, June 2018, Nuremberg, Germany

P. Mantzanas, E. Bayrakdar, D. Kübrich, T. Dürbaum (2018)
A Novel Detailed Analysis of the Boost Converter Utilizing Nonlinear Inductance and Capacitance
PCIM Conference, June 2018, Nuremberg, Germany

B. Kohlhepp, J. Göttle, E. Schmidt, T. Dürbaum (2018)
A Novel Combination of Algorithms for Accelerated Convergence to Steady-State
PCIM Conference, June 2018, Nuremberg, Germany

2017

E. Schmidt, D. Kübrich, T. Dürbaum (2017)
A Novel Approach to Reduce Losses in Boost PFC Stage of a 90W- Adapter
PCIM Conference, May 2017, Nuremberg, Germany

J. Dobusch, C. Oeder, D. Kübrich, T. Dürbaum (2017)
Square wave based small signal modeling of frequency controlled converters
Compel 2017, Stanford University, Stanford, USA

C. Kuring, J. Dobusch, T. Dürbaum (2017)
Novel Efficient and Reliable Network Simulation by Means of Lipschitz Constants
PCIM Conference, May 2017, Nuremberg, Germany

M. Albach (2017)
Induktivitäten in der Leistungselektronik
Springer Verlag, 417 Seiten, ISBN 978-3-658-15080-8

A. Pawellek, T. Dürbaum (2017)
Analysis of a Novel Buck-Buck Single Stage LED-Ballast
PCIM Conference, May 2017, Nuremberg, Germany

P. Mantzanas, T. Dürbaum (2017)
A Novel Detailed Analysis of the Flyback Converter Utilizing a Transformer with Nonlinear 
Magnetizing Inductance 
PCIM Conference, May 2017, Nuremberg, Germany

E. Stenglein, M. Albach (2017)
A Novel Approach to Calculate the Reluctance of Air-Gaps in Ferrite Cores
PCIM Conference, May 2017, Nuremberg, Germany

2016

A. Bucher, D. Kübrich, T. Dürbaum (2016)
Comprehensive Design Approach for a Two-Stage Fixed-Frequency Contactless Energy Transfer 
System Based on the Extended First Harmonic Approximation 
18th European Conference on Power Electronics and Applications (EPE 2016 ECCE Europe), 
September 2016, Karlsruhe, Germany

E. Stenglein, M. Albach (2016)
Analytical calculation method for the non-linear characteristic of ferrite-cored inductors with 
stepped air gap
Electrical Engineering -Archiv für Elektrotechnik, September 2016, doi:10.1007/s00202-016-0432-z

C. Oeder, M. Barwig, T. Dürbaum (2016)
Estimation of Switching Losses in Resonant Converters Based on Datasheet Information
18th European Conference on Power Electronics and Applications (EPE 2016 ECCE Europe), 
September 2016, Karlsruhe, Germany

A. Pawellek, T. Dürbaum (2016)
LED-Ballasts in Lighting Applications – A Comparison of Cost Effective One Stage Topologies
18th European Conference on Power Electronics and Applications (EPE 2016 ECCE Europe), 
September 2016, Karlsruhe, Germany

E. Stenglein, D. Kübrich, M. Albach (2016)
Analytical Calculation of the Current Depending Inductance of a Stepped Air Gap Inductor
18th European Conference on Power Electronics and Applications (EPE 2016 ECCE Europe), 
September 2016, Karlsruhe, Germany

E. Stenglein, M. Albach (2016)
The Reluctance of Large Air Gaps in Ferrite Cores
18th European Conference on Power Electronics and Applications (EPE 2016 ECCE Europe), 
September 2016, Karlsruhe, Germany

H. Roßmanith, E. Stenglein, M. Albach (2016)
Prediction of the Leakage Inductance in High Frequency Transformers 
18th European Conference on Power Electronics and Applications (EPE 2016 ECCE Europe), 
September 2016, Karlsruhe, Germany

P. Mantzanas, M. Barwig, D. Kübrich, T. Dürbaum (2016)
Efficiency Improvement of a Flyback Converter by Employing a Stepped Air-Gap Transformer 
18th European Conference on Power Electronics and Applications (EPE 2016 ECCE Europe), 
September 2016, Karlsruhe, Germany

E. Stenglein, D. Kübrich, M. Albach (2016)
Prediction of the Non-linear Behavior of a Stepped Air Gap Inductor 
17th IEEE Workshop on Control and Modeling for Power Electronics (COMPEL 2016), 
June 2016, Trondheim, Norway

P. Mantzanas, M. Barwig, T. Dürbaum (2016)
Analytical Calculation of the Flyback Converter Utilizing a Transformer with Saturable 
Magnetizing Inductance 
17th IEEE Workshop on Control and Modeling for Power Electronics (COMPEL 2016), 
June 2016, Trondheim, Norway

J. Dobusch, C. Oeder, T. Dürbaum (2016)
A novel method to simulate the control-to-output transfer function of resonant converters
PCIM Conference, May 2016, Nuremberg, Germany

C. Oeder, M. Barwig, T. Dürbaum (2016)
Novel Method for the Estimation of Switching Losses in Resonant Converters
PCIM Conference, May 2016, Nuremberg, Germany

A. Pawellek, T. Dürbaum (2016)
Detailed Comparison of One Stage Topologies for LED Lighting Applications
PCIM Conference, May 2016, Nuremberg, Germany

P. Mantzanas, D. Kübrich, M. Barwig, T. Dürbaum (2016)
Analysis of the Flyback Converter Utilizing a Transformer with Stepped Air-Gap 
PCIM Conference, May 2016, Nuremberg, Germany

2015

W. Hauser, M. Albach (2015)
Source Reconstruction From Near Field Scan Data of Stripline Structures
International Symposium on Antennas and Propagation (ISAP2015), November 2015, 
Hobart, Tasmania, Australia

A. Pawellek, T. Dürbaum (2015)
Analysis and Design of a Cost Effective One Stage Topology for LED 
Lighting Applications
EPE’15-ECCE Europe, September 2015, Geneva, Switzerland

J. Göttle, T. Dürbaum (2015)
A resonant single-stage PFC AC-DC converter
9th International Conference on Compatibility and Power Electronics (CPE), 
June 2015, Costa da Caparica, Portugal

A. Pawellek, T. Dürbaum (2015)
Novel Analysis of a Boost-Buck Single Stage LED-Ballast
PCIM Conference, May 2015, Nuremberg, Germany

E. Stenglein, C. Oeder, T. Dürbaum (2015)
Design of a Series Resonant Converter with Inductive Output Filter for 
130 W Street Lighting Application
PCIM Conference, May 2015, Nuremberg, Germany

M. Schmidt, M. Albach (2015)
Reconstruction of Currents from EMC Near-Field Measurements by Means of 
Continuity Equation Constraints
IEEE Symposium on EMC&SI, March 2015, Santa Clara, California, USA

2014

J. Göttle, T. Hieke, T. Dürbaum (2014)
Analysis and Optimization of the Asymmetrical Half-Bridge PWM Converter
EPE’14-ECCE Europe, August 2014, Lappeenranta, Finland

M. Barwig, C. Oeder, T. Dürbaum (2014)
Analysis and Design of a Partial-Multi-Resonant LLC Converter
EPE’14-ECCE Europe, August 2014, Lappeenranta, Finland

Binder, C. Oeder, M. Barwig, T. Dürbaum (2014)
Influence of Component Tolerances onto Design and Losses of Resonant LLC Converters
EPE’14-ECCE Europe, August 2014, Lappeenranta, Finland

A. Pawellek, T. Dürbaum (2014)
Analysis and Design of a Boost-Buck Single Stage Topology for LED Lighting Applications
EPE’14-ECCE Europe, August 2014, Lappeenranta, Finland

M. Schmidt, M. Albach (2014)
The advantages of spatial domain probe compensation technique in EMC near-field measurements
International Symposium on Electromagnetic Compatibility, May 2014, Tokio, Japan

C. Oeder, T. Dürbaum (2014)
A Novel Method to Predict ZVS Behavior of LLC Converters
PCIM Conference, May 2014, Nuremberg, Germany

C. Oeder, J. Goettle, T. Dürbaum (2014)
Novel Improved Loss Prediction for Multi-Resonant Converter Optimization Based on the 
First-Harmonic-Approximation
PCIM Conference, May 2014, Nuremberg, Germany

J. Göttle, T. Hieke, T. Dürbaum (2014)
Detailed Analysis and Optimization of the Asymmetrical Half-Bridge PWM 
Converter including Parasitics
PCIM Conference, May 2014, Nuremberg, Germany

J. Stahl, M. Albach (2014)
Non-Ideal Smoothing Transformer for Effective Differential Mode Noise 
Reduction in an SMPS
IEEE Transactions on Power Electronics, vol. 29, no.6, S. 2774-2786

2013

F. Diepold, D. Kübrich, A. Leicht, M. Albach (2013)
Dynamically adapting equivalent circuit model describing the EMI behaviour of magnetic 
components
European Conference on Power Electronics and Applications (EPE), September 2013, 
Lille, Frankreich

Tech, C. Oeder. D. Kübrich, T. Dürbaum (2013)
Application specific efficiency improvement for an industrial point of load converter
IEEE Applied Power Electronics Conference and Exposition (APEC), March 2013, Long Beach, 
California, USA

C. Oeder, T. Dürbaum (2013)
ZVS Investigation of LLC Converters Based on FHA Assumptions
IEEE Applied Power Electronics Conference and Exposition (APEC), March 2013, Long Beach, 
California, USA

M. Schmidt, M. Albach (2013)
Die Vorzüge der Sondenkompensation im Ortsbereich bei EMV Nahfeldmessungen
Kleinheubacher Tagung, September 2013, Miltenberg, Deutschland

M. Albach, H. Roßmanith, D. Kübrich (2013)
EMV in Theorie und Praxis
VDI Wissensforum, Frankfurt, 21.-22. Februar und Stuttgart, 25.-26. Juni 2013

M. Albach, A. Stadler (2013)
Cluster-Schulung: Induktivitäten in der Leistungselektronik
Cluster Leistungselektronik im ECPE e.V., Nürnberg, 23.-24. Juli und 26.-27. September 2013

M. Albach, H. Roßmanith, W. Hauser (2013)
Wicklungen – besser auslegen statt besser kühlen
Elektronik Components, September 2013, S. 35-39

J. Stahl, S. Wieczorek, M. Schmidt, M. Albach (2013)
Passive Cancellation in a Flyback for Effective CM Reduction
IEEE Energy Conversion Congress & Exposition (ECCE), September 2013, 
Denver, Colorado, USA

M. Schmidt, J. Stahl, M. Albach (2013)
Important Aspects on Effective Common Mode Noise Filtering by Means of Passive 
Cancellation
IEEE Applied Power Electronics Conference and Exposition (APEC), March 2013, Long Beach, 
California, USA

M. Schmidt, J. Stahl, M. Albach (2013)
Effective Common Mode Noise Filtering by Means of Passive Cancellation: Some 
Important Aspects
PCIM Conference, May 2013, Nuremberg, Germany

J. Stahl, T. Hieke, C. Oeder, T. Dürbaum (2013)
Small Signal Analysis of the Resonant LLC Converter
IEEE Energy Conversion Congress & Exposition Asia (ECCE Asia), June 2013, 
Melbourne, Australia

J. Stahl, S. Wieczorek, M. Schmidt, M. Albach (2013)
Effective CM Reduction in a Flyback by means of Passive Cancellation
IEEE Energy Conversion Congress & Exposition Asia (ECCE Asia), June 2013, 
Melbourne, Australia

A. Leicht, J. Fischer, M. Albach (2013)
Novel approach to describe the material functions of the Hodgdon Model to match the 
hysteresis behavior of silicon iron 6.5 %
PCIM Conference, May 2013, Nuremberg, Germany

Tech, C. Oeder, T. Dürbaum (2013)
A Novel Optimization Strategy for Point of Load Converters
PCIM Conference, May 2013, Nuremberg, Germany

E. Stenglein, C. Oeder, T. Dürbaum (2013)
A Novel Detailed Analysis of the Series Resonant Converter with Inductive Output Filter
PCIM Conference, May 2013, Nuremberg, Germany

J. Stahl, E. Stenglein, M. Albach (2013)
Automated EMI Measurement Set-up Comprising CM and DM Measurements with a 
Modified LISN
PCIM Conference, May 2013, Nuremberg, Germany

H. Roßmanith, M. Albach, J. Fischer, A. Stadler (2013)
Improved characterization of the magnetic properties of hexagonally packed wires
EPE Journal, Vol. 22, Nr. 4, S. 5-10

M. Albach (2013)
Strategies to reduce EMC Problems in Power Electronic Circuits
Micromaterials and Nanomaterials, Fraunhofer ENAS, Heft 14/12, S. 30 – 34

2012

A. Bucher, T. Dürbaum (2012)
Analysis and Design of a Contactless Power Transmission System Based on the 
Extended First Harmonic Approximation
IEEE Industrial Application Society (IAS) Annual Meeting, Oktober 2012, Las Vegas, USA

A. Leicht, J. Fischer, M. Albach (2012)
A Polynomial Approach applied to the Hodgdon Model to describe the Hysteresis 
Loops of SiFe
IEEE International Conference on Electromagnetics in Advanced Applications (ICEAA), 
September 2012, Cape Town, South Africa

J. Stahl, R. Junghaenel, M. Albach (2012)
Non-Ideal Smoothing Transformer as Effective Differential Mode Filter
IEEE Energy Conversion Congress & Exposition (ECCE), September 2012, Raleigh, USA

J. Stahl, H. Steuer, T. Dürbaum (2012)
Discrete Modeling of Resonant Converters – Steady State and Small Signal Description
IEEE Energy Conversion Congress & Exposition (ECCE), September 2012, Raleigh, USA

M. Albach, H. Roßmanith, D. Exner (2012)
Litzen im Vergleich
Elektronik Components, August 2012, S. 32 – 36

J. Stahl, T. Dürbaum (2012)
Steady State and Small Signal Modeling of Resonant Converters – Practical Validation
13th IEEE Workshop on Control and Modeling for Power Electronics (COMPEL 2012), 
Juni 2012, Kyoto, Japan

A. Pawellek, J. Stahl, A. Fetzer, M. Albach (2012)
Effective Measurement Set-up to Determine the Inductivity of Nonlinear Inductances as a 
Function of the Inductor Current
13th IEEE Workshop on Control and Modeling for Power Electronics (COMPEL 2012), 
Juni 2012, Kyoto, Japan

A. Pawellek, M. Weinmann, T. Dürbaum (2012)
Development of a Wireless Dimmable CFL for Domestic Application on the Basis of 
Bluetooth Technology
PCIM Conference, May 2012, Nuremberg, Germany

C. Oeder, T. John, T. Dürbaum (2012)
Arbitrary Load Profile Emulator Based on a µC Controlled Switchable Resistor Network
PCIM Conference, May 2012, Nuremberg, Germany

C. Oeder, A. Bucher, T. Dürbaum (2012)
Comparison of Output Rectifier Topologies in Case of a Low-Profile LLC Converter
PCIM Conference, May 2012, Nuremberg, Germany

A. Pawellek, C. Oeder, T. Dürbaum (2012)
Resonant LLC and LCC Converter – Comparison Based on an Identical Hardware Set-Up
PCIM Conference, May 2012, Nuremberg, Germany

M. Schmidt, J. Stahl, M. Albach (2012)
Analysis of parasitic effects on passive compensation of common mode noise in a 
boost converter
PCIM Conference, May 2012, Nuremberg, Germany

J. Göttle, D. Kübrich, T. Dürbaum (2012)
Power loss measurement using a fast and accurate open calorimeter
PCIM Conference, May 2012, Nuremberg, Germany

A. Leicht, M. Albach, M. Spang, D. Kübrich (2012)
Analytical Calculation of the Current Sharing in Copper Coils with Parallel Windings
PCIM Conference, May 2012, Nuremberg, Germany

J. Stahl, T. Dürbaum (2012)
Discrete Modeling of Resonant Converters – Practical Validation
PCIM Conference, May 2012, Nuremberg, Germany

J. Stahl, R. Junghaenel, M. Albach (2012)
Smoothing Transformer for Differential Mode Noise Reduction
PCIM Conference, May 2012, Nuremberg, Germany

M. Albach, J. Fischer (2012)
Elektrotechnik – Aufgabensammlung mit Lösungen
Pearson Verlag, 378 Seiten, ISBN 978-3-86894-070-1

Best Student Paper Award
M. Schmidt, J. Stahl, M. Albach (2012)
Interaction between Passive Common Mode Noise Cancellation and Conservative 
Passive Filtering
2012 Asia-Pacific EMC-Symposium in SINGAPORE, May 21-24, 2012

J. Stahl, R. Junghaenel, M. Schmidt, M. Albach (2012)
Smoothing Transformer as Effective Differential Mode Filter
2012 Asia-Pacific EMC-Symposium in SINGAPORE, May 21-24, 2012

M. Albach (2012)
Induktive Komponenten in der Leistungselektronik
Vortrag im Rahmen des Institutskolloquiums des Elektrotechnischen Institutes der 
Universität Karlsruhe, 06.02.2012

M. Schmidt, J. Stahl, M. Albach (2012)
Influence of Parasitic Effects on Passive Cancellation of Common Mode Noise 
in a Boost Converter
IEEE Applied Power Electronics Conference and Exposition (APEC), 5.–9. Februar 2012, 
Orlando, Florida, USA

D. Kübrich, J. Goettle, T. Dürbaum (2012)
Power Loss Measurement based on Transient Temperature Rise
IEEE Applied Power Electronics Conference and Exposition (APEC), 5.–9. Februar 2012, 
Orlando, Florida, USA

2011

H. Roßmanith, M. Doebroenti, M. Albach, D. Exner (2011)
Measurement and Characterization of High Frequency Losses in Nonideal Litz Wires
IEEE Transactions on Power Electronics, Nov. 2011, Volume 26, Nr. 11, S. 3386 – 3394

M. Albach (2011)
Grundlagen und Dimensionierung von Induktivitäten
Vortrag im Rahmen des Cluster-Seminars „Induktivitäten in der Leisungselektronik“, 
05.-06. Oktober 2011, Nürnberg

Teuber, A. Bucher, T. Dürbaum (2011)
Industrie-Schaltnetzgeräte im Test – Teil 3: elektromagnetische Eigenschaften
Elektronik 15/2011, S. 38-42

Teuber, A. Bucher, T. Dürbaum (2011)
Industrie-Schaltnetzgeräte im Test – Teil 2: dynamische Eigenschaften
Elektronik 13/2011, S. 34-39

Teuber, A. Bucher, T. Dürbaum (2011)
Industrie-Schaltnetzgeräte im Test – Teil 1: stationäre Eigenschaften
Elektronik 11/2011, S. 48-54

A. Pawellek, C. Oeder, J. Stahl, T. Dürbaum (2011)
The Resonant LLC vs. LCC Converter – Comparing Two Optimized Prototypes
Energy Conversion Congress and Exposition (ECCE), September 2011, Phoenix, USA

J. Stahl, D. Kübrich, A. Pawellek, C. Oeder, T. Dürbaum (2011)
Automatic Measurement of the Reverse Recovery Behavior of Ultra-Fast Diodes
Energy Conversion Congress and Exposition (ECCE), September 2011, Phoenix, USA

M. Albach (2011)
Elektrotechnik
Pearson Verlag, 629 Seiten, ISBN 978-3-86894-081-7

H. Roßmanith, M. Albach, J. Patz, A. Stadler (2011)
Improved characterization of the magnetic properties of hexagonally packed wires
European Conference on Power Electronics and Applications (EPE), August 2011, 
Birmingham, UK

J. Stahl, D. Kübrich, T. Dürbaum, A. Leicht, J. Patz (2011)
A Fully Automated Measurement Set-up for the Determination of the Reverse 
Recovery Behaviour of Ultra-Fast Diodes
European Conference on Power Electronics and Applications (EPE), August 2011, 
Birmingham, UK

A. Leicht, M. Albach, M. Spang, D. Kübrich (2011)
Current Distribution in Copper Coils with Parallel Windings
European Conference on Power Electronics and Applications (EPE), August 2011, 
Birmingham, UK

A. Pawellek, C. Oeder, T. Dürbaum (2011)
Comparison of Resonant LLC and LCC Converters for Low-Profile Applications
European Conference on Power Electronics and Applications (EPE), August 2011, 
Birmingham, UK

M. Spang, M. Albach (2011)
Determination of the receiving characteristics of near-field probes by simulation of the 
fields in transmitting mode
CST European User Group Meeting, Mai 2011, Freising

M. Schmidt, T. Fischer, M. Albach (2011)
Analytical Prediction of the Effect of Conductive Planes on EMC Filter Structures
International Conference on Electromagnetics in Advanced Applications (ICEAA), 
September 2011, Torino, Italy

M. Albach (2011)
EMV in der Leistungselektronik
Vortrag im Rahmen des Seminars „Zuverlässigkeit moderner Systeme“, Fraunhofer ENAS, 
Paderborn, 08.07.2011

M. Albach (2011)
Grundlagen der Elektrotechnik 2, 2. Auflage, Periodische und nicht periodische Signalformen
Pearson Studium, 295 Seiten, ISBN 978-3-86894-080-0

M. Albach, (2011)
Grundlagen der Elektrotechnik 1, 3. Auflage, Erfahrungssätze, Bauelemente, 
Gleichstromschaltungen
Pearson Studium, 349 Seiten, ISBN 978-3-86894-079-4

C. Oeder, A. Bucher, J. Stahl, T. Dürbaum, (2011)
Discrepancies Caused by Approximation Methods in Case of Resonant LLC Converters with 
Capacitive Output Filter
PCIM Conference, May 2011, Nuremberg, Germany

C. Oeder, A. Bucher, T. Dürbaum, (2011)
Low-Profile LLC Converter for Notebook Adapters
PCIM Conference, May 2011, Nuremberg, Germany

J. Stahl, D. Kübrich, T. Dürbaum, A. Gerfer, (2011)
Balancing Unit for Proper Characterization of a Modified LISN for Effective 
EMI Noise Separation
PCIM Conference, May 2011, Nuremberg, Germany

J. Stahl, A. Bucher, T. Dürbaum, (2011)
Output Impedance Calculation by Means of Sampled-Data Modeling
PCIM Conference, May 2011, Nuremberg, Germany

A. Pawellek, A. Bucher, T. Dürbaum, (2011)
Analysis and Design of a LCC Converter for Low-Profile Resonant Power Adapters 
PCIM Conference, May 2011, Nuremberg, Germany

A. Pawellek, A. Bucher, T. Dürbaum, (2011)
Spannungsregler kleiner Leistung im Test – Teil 4: Dynamische Kenngrößen und 
elektromagnetische Verträglichkeit 
Elektronik, Ausgabe 09/2011, p. 40 – 49

A. Pawellek, A. Bucher, T. Dürbaum, (2011)
Spannungsregler kleiner Leistung im Test – Teil 3: Messung statischer Kenngrößen 
Elektronik, Ausgabe 07/2011, p. 20 – 25

A. Pawellek, A. Bucher, T. Dürbaum, (2011)
Spannungsregler kleiner Leistung im Test – Teil 2: Messung statischer Kenngrößen 
Elektronik, Ausgabe 03/2011, p. 28 – 33

J. Stahl, D. Kübrich, T. Dürbaum (2011)
Automated Test Set-up for Reverse Recovery Characterization of Ultrafast Diodes
IEEE Applied Power Electronics Colloquium (IAPEC), 18.–19. April 2011, Johor Bharu, Malaysia

J. Stahl, D. Kübrich, T. Dürbaum, C. Oeder (2011)
Fully Automated Measurement Set-up for Ultra-Fast Recovery Diode Testing
IEEE Applied Power Electronics Conference and Exposition (APEC), 6.–10. März 2011, 
Fort Worth, Texas, USA

M. Albach (2011)
Induktive Komponenten in der Leistungselektronik
Vortrag im Rahmen der VDE Fachtagung – ETG Fachbereich Q1 
„Leistungselektronik und Systemintegration“,
Bad Nauheim, 13.04.2011

2010

A. Pawellek, A. Bucher, T. Dürbaum, (2010)
Spannungsregler kleiner Leistung im Test – Teil 1: Grundlagen und Testfeld 
Elektronik, Ausgabe 26/2010, p. 26 – 33

M. Albach (2010)
Minimale Funknetzstörungen durch optimierte Auslegung von Funknetzteilen
Vortrag im Rahmen des 5. Chemnitzer Seminar für Nanotechnologie, 
Nanomaterials und Nanoreliability, Fraunhofer ENAS, Chemnitz, 13.10.2010

M. Albach (2010)
Die elektrischen und magnetischen Ersatzschaltbilder von Transformatoren
Vortrag im Rahmen des STS-Spezialseminars in Ludwigshafen-Bodman, 30.09.2010

Bosch, H. Roßmanith (Co-Autor) (2010)
Kraftfahrtechnisches Taschenbuch – Kapitel Elektrotechnik

A. Pawellek, A. Bucher, T. Dürbaum (2010)
Analysis and Design of a Resonant LCC Converter for Low-Profile Applications
IEEE Energy Conversion Congress and Exposition (ECCE 2010), 12 – 15 September 2010, 
Atlanta, USA

A. Pawellek (2010)
Low-profile Power Adapter Based on a Resonant LCC Converter
IEEE International Symposium on Industrial Electronics (ISIE 2010), 4 – 7 Juli 2010, 
Bari, Italy

J. Stahl, D. Kübrich, T. Dürbaum (2010)
Modification and characterization of a standard LISN for effective EMI noise separation
International Conference on Electromagnetics in Advanced Applications 
(ICEAA 2010 – Offshore)

A. Bucher, T. Dürbaum, J. Stahl (2010)
Rapid simulation of multi-resonant LLCC converters with capacitive output filter based on 
an extended first harmonic approximation
Energy Conversion Congress and Exposition (ECCE), 2010 IEEE, Page(s): 4041 – 4048

J. Stahl, D. Kübrich, T. Dürbaum (2010)
Characterisation of an effective EMI noise separation including a standard LISN
Electromagnetic Theory (EMTS), 2010 URSI International Symposium, Page(s): 13 – 16

J. Stahl, D. Kübrich, A. Bucher, T. Dürbaum (2010)
Characterization of a modified LISN for effective separated measurements of common 
mode and differential mode EMI noise
Energy Conversion Congress and Exposition (ECCE), 2010 IEEE, Page(s): 935 – 941

M. Albach, M. Döbrönti, H. Roßmanith, D. Exner, A. Stadler (2010)
Wicklungsverluste in Spulen und Trafos aus HF-Litze
Elektronik Industrie, Oktober 2010, S.32-34, Hüthig Verlag

J. Stahl, A. Bucher, C. Oeder, T. Dürbaum (2010)
Sampled-Data Modeling Applied to Output Impedance Reveals Missing Term 
in State-Space Averaging
12th IEEE Workshop on Control and Modeling for Power Electronics (COMPEL 2010), 
28 – 30 Juni 2010, Boulder, Colorado

C. Oeder, A. Bucher, J. Stahl, T. Dürbaum (2010)
A Comparison of Different Design Methods for the LLC Converter with Capacitive 
Output Filter
12th IEEE Workshop on Control and Modeling for Power Electronics (COMPEL 2010), 
28 – 30 Juni 2010, Boulder, Colorado

C. Oeder (2010)
Analysis and Design of a Low-Profile LLC Converter
IEEE International Symposium on Industrial Electronics (ISIE 2010), 4 – 7 Juli 2010, 
Bari, Italy

M. Schmidt (2010)
An Analytical Model to Predict the Influence of Conductive Planes on EMC Filter Structures
2nd IEEE Germany Student Conference, 20./21. Mai 2010, Hamburg

A. Bucher, T. Dürbaum (2010)
Extended First Harmonic Approximation in Case of LLCC Converters with 
Capacitive Output Filter
15th IEEE Mediterranean Electrotechnical Conference (MELECON), pp. 1303 – 1308

A. Pawellek, A. Bucher, T. Dürbaum (2010)
Resonant LCC Converter for Low-Profile Applications
15th IEEE Mediterranean Electrotechnical Conference (MELECON), pp. 1309 – 1314

M. Doebroenti, M. Schmid, T. Dürbaum (2010)
Matlab based fast and accurate Simulation of a Power Factor Corrector Switch Mode 
Power Supply in Boundary Conduction Mode with Valley Skipping
Twelfth IEEE Workshop on Control and Modeling for Power Electronics (COMPEL 2010), 
28 – 30 Juni 2010, Boulder, Colorado

M. Schmid, M. Doebroenti, A. Bucher and T. Dürbaum (2010)
Method for the Fast and Accurate Simulation of Switch-Mode Power Supplies
International Power Electronics Conference IPEC, June 2010, Sapporo, Japan

M. Schmid, M. Doebroenti, A. Bucher and T. Dürbaum (2010)
Fast and Accurate Simulation Method for Switch-Mode Power Supplies
PCIM Conference, May 2010, Nuremberg, Germany

T. Fischer, G. Schubert, M. Albach (2010)
Influence of Adjacent Metal Cover Planes on EMC Filter Structures
IEICE Transactions on Communcations, Vol.E93-B, No.07, Jul. 2010

M. Albach, M. Döbrönti, H. Roßmanith, D. Exner, A. Stadler (2010)
Optimized Winding = Optimum in Power Efficiency

M. Albach, J. Patz, H. Roßmanith, D. Exner, A. Stadler (2010)
Optimale Wicklung = optimaler Wirkungsgrad
Elektronik Power, April 2010, S.38-46, Weka Verlag

M. Spang, M. Albach, G. Schubert (2010)
Calibration of Probes for EMC Near-Field Scanning
CST European User Group Meeting, April 2010, Darmstadt

A. Pawellek, A. Bucher, T. Dürbaum (2010)
Analysis and Design of a Low-Profile Resonant LCC Converter
Applied Power Electronics Conference (APEC), Palm Springs, USA

A. Bucher, T. Dürbaum (2010)
Rapid Simulation of Fourth-Order Multi-Resonant LLCC Converters with Capacitive 
Output Filter
Applied Power Electronics Conference (APEC), Palm Springs, USA

M. Spang, T. Stoeckel, G. Schubert, M. Albach (2010)
Application of Probes with Multiple Outputs on Probe-Compensated EMC 
Near-Field Measurements
International Conference on Industrial Technology (ICIT), March 2010, Viña del Mar, Chile

A. Stadler, M. Albach, A. Lindner (2010)
A practical method to measure electrical AC conductivity of MnZn ferrites using 
conventional toroids
IEEE Transactions on Magnetics, vol. 46, no. 2, February 2010

2009

M. Albach (2009)
Modellierung induktiver Komponenten – Eine thematische Einführung
Vortrag im Rahmen des Cluster-Workshop „Induktivitäten in der Leistungselektronik“, 
ECPE, Nürnberg, 29.10.2009

M. Albach (2009)
Die Simulation von Verlustmechanismen
Vortrag im Rahmen des Cluster-Workshop „Induktivitäten in der Leistungselektronik“, 
ECPE, Nürnberg, 29.10.2009

D. Kübrich, M. Schmidt, T. Dürbaum (2009)
Prediction of the EMC behaviour of switch mode power supplies in boundary conduction 
mode including switching frequency limitations
EPE Power Electronics and Motion Control Conference, September 2009, Barcelona

Schildbach, D. Kübrich, T. Dürbaum (2009)
Averaged large signal model of boost power factor corrector in boundary conduction mode
EPE Power Electronics and Motion Control Conference, September 2009, Barcelona

Uddin, M. Spang, T. Mager, A. Thiede (2009)
Integrated Active Sensors for Near-Field Scanning
XV International Symposium on Theoretical Electrical Engineering (ISTET), 
June 2009, Lübeck, Germany

Uddin, M. Spang, T. Mager, A. Thiede (2009)
Integrated Active Near-Field Sensor in GaAs Technology
European Microwave Integrated Circuits Conference (EuMIC), September 2009, Rome, Italy

Best Student Presentation Award
A. Stadler, M. Albach, A. Lindner (2009)
A practical method to measure electrical AC conductivity of MnZn ferrites 
using conventional toroids
19th Soft Magnetic Materials Conference SMM19, September 2009, Torino, Italy

Best Student Paper Award
Ch. Schildbach (2009)
Automated Measurement Setup for the Control-to-Output Transfer Function of 
Power Factor Correctors
1st IEEE Germany Student Conference, 14./15. Juni 2009, Hamburg

A. Bucher, D. Kirchner, T. Dürbaum (2009)
An automatic approach for the extraction of data curves for magnetic materials
PCIM Conference, May 2009, Nuremberg, Germany

Best Paper Award
T. Fischer, G. Schubert, M. Albach (2009)
Influence of Adjacent Metal Cover Planes on EMC Filter Structures
International Symposium on Electromagnetic Compatibility, July 2009, Kyoto, Japan

T. Fischer, M. Albach, G. Schubert (2009)
Simulation of EMC-Filters applied in Automotive Electronic Control Units
CST European User Group Meeting, March 2009, Darmstadt

Mager, C. Reinhold, M. Spang, G. Schubert, T. Steinecke, C. Hedayat, 
T. Gessner (2009)
Electromagnetic Near-Field Scanning in Time and Frequency Domain for 
EMI Characterisation
Smart Systems Integration Conference, March 2009, Brussels, Belgium

M. Spang, M. Albach, N. Uddin, A. Thiede (2009)
Miniature Dipole Antenna for Active Near-Field Sensor
German Microwave Conference (GeMiC 2009), March 2009, München, Germany

T. Fischer, C. Kneuer, M. Albach, G. Schubert (2009)
Mutual Inductance of Capacitor Low-Pass Filters
20th International Zurich Symposium on Electromagnetic Compatibility, Zurich

2008

T. Fischer, S. Oberneder, G. Schubert, M. Albach (2008)
Breitbandige Charakterisierung und Modellierung von EMV-Filtern im Automobilbereich
HF-Report, 22. Jahrgang, Nr. 4, November/Dezember 2008

M. Albach (2008)
Grundlagen der Elektrotechnik 1, 2. Auflage, Erfahrungssätze, Bauelemente, 
Gleichstromschaltungen
Pearson Studium, 349 Seiten, ISBN 9783827373410

Uddin, M. Spang, A. Thiede (2008)
Integrated Magnetic Loop Probe in GaAs Technology for Active Near-Field Sensor
38th European Microwave Conference (EuMC), Oct. 2008, Amsterdam, The Netherlands

Mager, A. Tankielun, M. Spang, G. Schubert, T. Steinecke, W. John (2008)
Electromagnetic Near-Field Scanning in Time and Frequency Domain
Sophia Antipolis MicroElectronics (SAME) Conference, Oct. 2008, Sophia Antipolis, France

M. Spang, M. Albach (2008)
Optimized Winding Layout for Minimized Proximity Losses in Coils with Rod Cores
IEEE Transactions on Magnetics, vol. 44, issue 7, July 2008, pp. 1815-1821

A. Bucher, M. Schmid, L. Bendkowski and T. Dürbaum (2008)
Validation and Comparison of different PWM Converter Small Signal Models
EPE Power Electronics and Motion Control Conference, September 2008, Poznan

A. Bucher, M. Schmid, T. Dürbaum, D. Kübrich (2008)
Consideration of Conduction Losses for the Series Resonant Converter by Means 
of a Simple Extension to the SPA Approach
EPE Power Electronics and Motion Control Conference, September 2008, Poznan

A. Bucher, T. Dürbaum, D. Kübrich, S. Hoehne (2008)
Multi-Resonant LCC Converter – Comparison of Different Methods for the 
Steady-State Analysis
Power Electronics Specialists Conference PESC, June 2008, Rhodes

A. Bucher, T. Dürbaum, D. Kübrich (2008)
Simple Extension to the State-Plane Analysis Approach for the Series Resonant 
Converter to Include Conduction Losses
PCIM Conference, May 2008, Nuremberg, Germany

A. Bucher, T. Dürbaum, D. Kübrich (2008)
Automated Test Set-up for Efficiency Measurements of Switch Mode Power Supplies
PCIM Conference, May 2008, Nuremberg, Germany

A. Bucher, M. Schmid, L. Bendkowski, T. Dürbaum (2008)
Comparison of Different PWM Converter Small-Signal Models
PCIM Conference, May 2008, Nuremberg, Germany

Uddin, M. Spang, A. Thiede (2008)
Miniature Loop Antenna for Active Near-Field Sensor
German Microwave Conference (GeMiC 2008), March 2008, Hamburg, Germany

M. Spang, M. Albach, G. Schubert (2008)
Response of a Magnetic Loop Probe to the Current and Voltage on a Microstrip Line
IEEE EMC Symposium, August 2008, Detroit, Michigan

T. Fischer, M. Spang, M. Albach (2008)
Easy de-embedding of symmetrical coax-to-microstrip transitions
12th IEEE Workshop on Signal Propagationon Interconnects (SPI)
12 – 15 Mai 2008, Avignon, France

T. Fischer, S. Oberneder, G. Schubert, M. Albach (2008)
Breitbandige Charakterisierung und Modellierung von EMV-Filtern im Automobilbereich
Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit, 
EMV 2008, März 2008, Düsseldorf, Deutschland

2007

D. Kübrich, M. Schmid, T. Dürbaum (2007)
Analysis of a DSP-system in order to flexibly control a switch mode power supply 
12th European Conference on Power Electronics and Applications – EPE 2007,
2 – 5 September 2007, Aalborg, Denmark

A. Bucher, T. Dürbaum, D. Kübrich (2007)
Comparison of Methods for the Analysis of the Parallel Resonant Converter with 
Capacitive Output Filter 
12th European Conference on Power Electronics and Applications – EPE 2007,
2 – 5 September 2007, Aalborg, Denmark

S. Schuh, H. Roßmanith, M. Albach (2007)
Reduction of magnetic field strength on PCB level – Laboratory for power 
electronic students
12th European Conference on Power Electronics and Applications – EPE 2007,
2 – 5 September 2007, Aalborg, Denmark

H. Roßmanith, M. Albach (2007)
Fast and precise calculation of winding losses in P-, RM- and ETD-ferrite core inductors 
2nd International Conference on Automotive Power Electronics – APE 2007,
Paris – Salons de l’Aveyron, 26 & 27 September 2007

A. Bucher, M. Albach, T. Dürbaum, D. Kübrich (2007)
Industrie-Schaltnetzgeräte im Test – Teil 3: elektromagnetische Verträglichkeit 
Elektronik, Ausgabe 10/2007, p. 86 – 90

A. Bucher, M. Albach, T. Dürbaum, D. Kübrich (2007)
Industrie-Schaltnetzgeräte im Test – Teil 2: dynamische Eigenschaften
Elektronik, Ausgabe 09/2007, p. 72 – 78

M. Albach, A. Stadler, M.Spang (2007)
The Influence of Ferrite Characteristics on the Inductance of Coils With Rod Cores 
IEEE Transactions on Magnetics, vol. 43, no.6, June 2007, p. 2618 – 2620

A. Bucher, M. Albach, T. Dürbaum, D. Kübrich (2007)
Industrie-Schaltnetzgeräte im Test – Teil 1: stationäre Eigenschaften
Elektronik, Ausgabe 08/2007, p. 56 – 65

T. Fischer, G. Schubert, M. Albach (2007)
Unified filter characterization and measurement with multiport blocks
International Conference On Electromagnetics In Advanced Applications (ICEAA 07), 
Torino, Italy

T. Fischer, G. Schubert, M. Albach (2007)
EMI of active Front Ends applied in the Automotive Industry
18th International Zurich Symposium on Electromagnetic Compatibility, Munich

M. Schmid, D. Kübrich, M. Weiland, T. Dürbaum (2007)
Evaluation on the Efficiency of Power LEDs Driven with Currents Typical to 
Switch Mode Power Supplies
2007 IEEE Industry Applications Society Annual Meeting, New Orleans

T. Fischer, G. Schubert, M. Albach (2007)
Characterization of active circuits up to 1 GHz with respect to estimation 
of EMC behaviour
5th IASTED International Conference on Circuits, Signals, and Systems, 
July 2007, Banff, Canada

T. Fischer, M. Albach, G. Schubert (2007)
Accurate Impedance Characterization with a Vector Network Analyzer
VIIth International Symposium on Electromagnetic Compatibility and Electromagnetic Ecology, 
June 2007, St. Petersburg, Russia

M. Spang, M. Albach (2007)
Inductance of Coils with Rod Cores as a Function of Core Geometry and Winding Layout 
PCIM Conference, May 2007, Nuremberg, Germany

M. Spang, T. Fischer, M. Albach, G. Schubert (2007)
Prediction and Measurement of Common Mode EMI influence on high side 
current measurements
PCIM Conference, May 2007, Nuremberg, Germany

M. Schmid, D. Kübrich, M. Weiland, T. Dürbaum (2007)
Evaluation of power LEDs and their efficiency by driving them with currents typical 
to switch mode power supplies 
PCIM Conference, May 2007, Nuremberg, Germany

M. Schmid, A. Bucher, D. Kübrich, T. Dürbaum (2007)
Methods for the Analysis of the Parallel Resonant Converter with Capacitive Output Filter
PCIM Conference, May 2007, Nuremberg, Germany

M. Schmid, D. Kübrich, T. Dürbaum (2007)
Investigation on a DSP-system to digitally control a switching power supply
PCIM Conference, May 2007, Nuremberg, Germany

M. Schmid, M. Spang, T. Dürbaum (2007)
Implementation of a Pulse Generator for the Investigation of Dead-Time effects 
in Half-Bridges by a DSP system 
PCIM Conference, May 2007, Nuremberg, Germany

2006

M. Albach, A. Stadler, M.Spang (2006)
The Influence of Ferrite Characteristics on the Inductance of Coils with Rod Cores 
10th Joint MMM/Intermag Conference, January 2007, Baltimore, Maryland, USA

A. Stadler, M. Albach, A. Bucher (2006)
Calculation of Core Losses in Toroids with Rectangular Cross Section
12th International Power Electronics and Motion Control Conference EPE-PEMC, 
September 2006, Portoroz, Slovenia, paper T2-407

A. Bucher, T. Dürbaum, D. Kübrich, A. Stadler (2006)
Comparison of Different Design Methods for the Parallel Resonant Converter
12th International Power Electronics and Motion Control Conference EPE-PEMC, 
September 2006, Portoroz, Slovenia, paper T2-404

D. Kübrich, T. Dürbaum, A. Bucher (2006)
Investigation of Turn-Off Behaviour under the Assumption of Linear Capacitances
PCIM Conference, May/June 2006, Nuremberg, Germany

A. Bucher, T. Dürbaum, D. Kübrich (2006)
Comparison of First Harmonic Approximation with exact Solution in case of a 
Series Resonant Converter
PCIM Conference, May/June 2006, Nuremberg, Germany

M. Schmid, T. Dürbaum, D. Kübrich (2006)
A Fast Calculation Tool for the Design of PFC Converters – Method and Application
PCIM Conference, May/June 2006, Nuremberg, Germany

M. Spang, D. Kübrich, T. Dürbaum (2006)
A Programmable Pulse Generator for the Investigation of Dead Time Effects in Half Bridges 
PCIM Conference, May/June 2006, Nuremberg, Germany

A. Stadler, M. Albach (2006)
Analytical Calculation of Stray Fields Generated by Ferrite Rods in EMI 
Suppression Applications
PCIM Conference, May/June 2006, Nuremberg, Germany

S. Schuh, M. Albach (2006)
Influence of the Device Housing on Integrated Passives of Power Electronics
PCIM Conference, May/June 2006, Nuremberg, Germany

S. Schuh, M. Albach (2006)
EMC Shielding in Power Electronics Multilayers
Electrical Power Quality and Utilisation Journal, EPQU 2005, vol. XI, no. 2, pp. 57-63

A. Stadler, M. Albach, T. Dürbaum (2006)
Optimum EMC Design of Flyback and Load Resonant Converters Using 
Toroids with Air Gaps
Electrical Power Quality and Utilisation Journal, EPQU 2005, vol. XI, no. 2, pp. 15-22

A. Stadler, M. Albach (2006)
The Influence of the Winding Layout on the Core Losses and the Leakage Inductance 
in High Frequency Transformers
IEEE Transactions on Magnetics, vol. 42, no. 4, April 2006

M. Spang, G. Schubert (2006)
Modulanalyse unter Einbindung von messtechnisch bestimmten Black Box Modellen
Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit, 
EMV 2006, März 2006, Düsseldorf, Deutschland

A. Stadler, M. Albach, H. Roßmanith, G. Schubert (2006)
EMV-Integration in den Layout-Prozess am Beispiel einer Kombination von 
Mikrostreifen- und Triplate-Leitungen
Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit, 
EMV 2006, März 2006, Düsseldorf, Deutschland

S. Schuh, M. Albach (2006)
EMC Analysis of Planar PCB-Based Coils in the Vicinity of the Automobile Carriage
17th International Symposium on Electromagnetic Compatibility, EMC Zurich in Singapore, 
February 2006, Singapore,
paper 246

A. Stadler, M. Albach, H. Roßmanith, G. Schubert (2006)
The Influence of Ground and Floating Planes on the Electromagnetic Coupling 
Between Board Tracks
17th International Symposium on Electromagnetic Compatibility, EMC Zurich in Singapore, 
February 2006, Singapore,
paper 179

S. Schuh, M. Albach (2006)
EMC Shielding in Power Electronics Multilayers with Conductive Permeable Material
17th International Symposium on Electromagnetic Compatibility, EMC Zurich in Singapore, 
February 2006, Singapore,
paper 66

A. Stadler, M. Albach, H. Roßmanith, G. Schubert (2006)
Design Methodology to Limit Electromagnetic Coupling Between Board Tracks on 
PCB Level in Realtime
17th International Symposium on Electromagnetic Compatibility, EMC Zurich in Singapore, 
February 2006, Singapore,
paper 60

2005

D. Kübrich, M. Schmid, T. Dürbaum (2005)
A fast calculation tool for the design of PFC converters – Method and application
31st Annual Conference of the IEEE Industrial Electronics Society IECON 2005, 
November 2005, North Carolina, USA

Kugler, M. Albach, S. Schuh, D. Kübrich (2005)
ESD laboratory for power electronics students
11th European Conference on Power Electronics and Applications EPE, 
Sep. 2005, Dresden, Germany, paper 151

S. Schuh, M. Albach, R. Koch (2005)
A universal analytic model for planar coils with circular windings close to 
conductive-permeable foils
11th European Conference on Power Electronics and Applications EPE, 
Sep. 2005, Dresden, Germany, paper 163

A. Stadler, M. Albach, F. Macary (2005)
The Minimization of Copper Losses in Core-less Inductors: Application to Foil- and 
PCB-based Planar Windings 
11th European Conference on Power Electronics and Applications EPE, 
Sep. 2005, Dresden, Germany, paper 200

A. Stadler, M. Albach, S. Chromy (2005)
The optimization of high frequency operated transformers for resonant converters
11th European Conference on Power Electronics and Applications EPE, 
Sep. 2005, Dresden, Germany, paper 77

D. Kübrich, T. Dürbaum, K. Schetters (2005)
Mains harmonic reduction circuits using non linear inductances
11th European Conference on Power Electronics and Applications EPE, 
Sep. 2005, Dresden, Germany, paper 207

A. Stadler, M. Albach, F. Macary (2005)
The Minimization of Copper Losses in Core-less Inductors: Application to Foil- and 
PCB-based Planar Windings 
15th Conference on the Computation of Electromagnetic Fields Compumag, 
June 2005, Shenyang, Liaoning, China, vol. 1, p. 218-219

A. Stadler, M. Albach, S. Chromy (2005)
The Optimization of High Frequency Operated Transformers with E-Cores
15th Conference on the Computation of Electromagnetic Fields Compumag, 
June 2005, Shenyang, Liaoning, China, vol. 3, p. 72-73

T. Dürbaum, D. Kübrich, K. Schetters (2005)
Sensitivity analysis of air gap size of non linear inductance in passive mains 
harmonic reduction circuits
IEEE Power Electronics Specialists Conference PESC, June 2005, Recife, Brazil

S. Schuh, D. Kübrich, T. Dürbaum, F. Kugler (2005)
Teaching of ESD phenomena to power electronics students
IEEE Power Electronics Education Workshop PEEW, June 2005, Recife, Brazil,
paper 10725

M. Albach (2005)
Grundlagen der Elektrotechnik 2, Periodische und nicht periodische Signalformen
Pearson Studium, ca. 270 Seiten, ISBN 3-8273-7108-2

D. Kübrich, T. Dürbaum, K. Schetters (2005)
Application of Non Linear Inductance in Passive Mains Harmonic Reduction Circuits
PCIM Conference, June 2005, Nuremberg, Germany, p. 69-74

A. Stadler, M. Albach, F. Macary (2005)
Minimum Loss Design for Core-Less Foil Inductors
PCIM Conference, June 2005, Nuremberg, Germany, p. 159-163

A. Stadler, M. Albach, S. Chromy (2005)
The Optimization of High Frequency Operated Transformers with E-Cores – 
Application to Resonant Converters
PCIM Conference, June 2005, Nuremberg, Germany, p. 228-233

S. Schuh, M. Albach, R. Koch (2005)
Planar Inductive Components in the Vicinty of Conductive, Permeable Material
PCIM Conference, June 2005, Nuremberg, Germany, p. 563-568

S. Schuh, M. Albach (2005)
EMC shielding of planar inductive components in power electronics multilayers 
with conductive permeable layers
4th International Workshop on Compatibility in Power Electronics, CPE 2005, 
June 2005, Gdynia, Poland, p. 126-128

A. Stadler, M. Albach, T. Dürbaum (2005)
The Minimization of Magnetic Stray Fields from Transformers with Air Gapped Toroids
4th International Workshop on Compatibility in Power Electronics, CPE 2005, June 2005, 
Gdynia, Poland, p. 123-125

A. Stadler, M. Albach, D. Kübrich (2005)
The Optimization of Transformers with Air Gapped Toroids
20th Annual Applied Power Electronics Conference, APEC 2005, Austin, Texas, 
p. 1938-1943, paper 10356

T. Dürbaum, D. Kübrich, K. Schetters, A. Stadler (2005)
Influence of non linear magnetic inductance in passive mains harmonic 
reduction circuits
20th Annual Applied Power Electronics Conference, APEC 2005, Austin, Texas, 
p. 1170-1175, paper 10731

2004

M. Albach (2004)
Grundlagen der Elektrotechnik 1, Erfahrungssätze, Bauelemente, Gleichstromschaltungen
Pearson Studium, ca. 300 Seiten, ISBN 3-8273-7106-6

T. Dürbaum, T. Lopez, R. Elferich, N. Koper, T. Tolle (2004)
Third Quadrant Output Characteristics in High Density Trench MOSFETs
11th International Power Electronics and Motion Control Conference EPE-PEMC, 
September 2004, Riga, Latvia, paper A14370

A. Stadler, M. Albach, S. Chromy (2004)
The Minimization of Magnetic Stray Fields from UI-Cores with Air Gaps
11th International Power Electronics and Motion Control Conference EPE-PEMC, 
September 2004, Riga, Latvia, paper A101452

Best Poster Award
S. Schuh, M. Albach (2004)
Planar PCB-based transformers – Method of calculation and design study
11th International Power Electronics and Motion Control Conference EPE-PEMC, 
September 2004, Riga, Latvia, paper A19378

H. Roßmanith, T. Burghart, LS. EMF, G. Schubert, Conti Temic 
Microelectronic GmbH, (2004)
Evaluating the RF-Emissions of Automotive Cable Harness
IEEE Symposium on Electromagnetic Compatibility, August 2004, 
Santa Clara, USA, p. 787-791

M. Albach, A. Stadler (2004)
The Minimization of Magnetic Stray Fields from Toroids with Air Gaps
IEEE Symposium on Electromagnetic Compatibility, August 2004, 
Santa Clara, USA, p. 881-886

T. Dürbaum, K. Rigbers, S. Schröder, M. Wendt, R. W. De Doncker (2004)
Integrated Method for Optimization of Power Electronic Circuits
IEEE Power Electronics Specialists Conference PESC, June 2004

T. Dürbaum, T. Lopez, G. Sauerländer, T. Tolle (2004)
Comparison between resonant and conventional gate drivers in ZVS applications
PCIM Conference, May 2004, Nuremberg, Germany, p. 960-965

S. Schuh, LS. EMF, E. Waffenschmid, B. Ackermann, Philips GmbH, E. Langkabel, 
Isola AG, M. Wille, Ruwel AG, H. Marczinske, Straschu Leiterplatten GmbH, (2004)
Integral Manufacturing of Embedded Passive Integrated Circuits for Power Electronics
PCIM Conference, May 2004, Nuremberg, Germany, p. 848-853

S. Schuh, M. Albach, LS. EMF, E. Waffenschmid, Philips GmbH, (2004)
A New Characterisation Method for Ferrite Polymer Compound
PCIM Conference, May 2004, Nuremberg, Germany, p. 711-715

T. Dürbaum, T. Lopez, T. Tolle, R. Elferich (2004)
PCB Layout Inductance Modeling Based on a Time Domain Measurement Approach
19th Annual Applied Power Electronics Conference, APEC 2004.

2003

S. Schuh, LS. EMF, E. Waffenschmid, Philips GmbH, E. Langkabel, Isola AG, 
J.-D. Büsselmann, Straschu Leiterplatten, M. Wille, Ruwel AG, H. Marczinske, 
Straschu Leiterplatten GmbH, (2003)
3D-Integration in der Leistungselektronik: Neue Perspektiven für die 
Elektronikfertigung von morgen
BMBF Chipworkshop 2003, Dezember 2003, Berlin

S. Schuh, LS. EMF, E. Waffenschmid, Philips GmbH, E. Langkabel, Isola AG, 
J.-D. Büsselmann, Straschu Leiterplatten, M. Wille, Ruwel AG, H. Marczinske, 
Straschu Leiterplatten GmbH, (2003)
3D-Integration in der Leistungselektronik: Integrierte Bauelemente – Materialien 
und Herstellung
11. FED-Konferenz, Ludwigsburg, September 2003. Vortragsband Elektronik-Design, 
p. 538-552

S. Voss, (2003)
Equivalent Circuit Modelling for HF-Transformers
10th European Conference on Power Electronics and Applications EPE, Sep. 2003, 
Toulouse, France, paper 9

S. Schuh, M. Albach, (2003)
Magnetic field distribution in embedded passive integrated circuits
10th European Conference on Power Electronics and Applications EPE, Sep. 2003, 
Toulouse, France, paper 10

T. Dürbaum, T. Lopez, G. Sauerländer, T. Tolle, (2003)
A Detailed Analysis of a Resonant Gate Driver for Frequency Control Applications
10th European Conference on Power Electronics and Applications EPE, Sep. 2003, 
Toulouse, France, paper 842

T. Dürbaum, T. Tolle, R. Elferich, T. Lopez, (2003)
Quantification of Switching Loss Contributions in Synchronous Rectifier Applications
10th European Conference on Power Electronics and Applications EPE, Sep. 2003, 
Toulouse, France, paper 786

T. Dürbaum, G. Sauerländer, (2003)
AM Compatible Switch Mode Power Supply For Compact Audio Sets
10th European Conference on Power Electronics and Applications EPE, Sep. 2003, 
Toulouse, France, paper 271

T. Dürbaum, T. Tolle, R. Elferich, (2003)
Switching loss contributions of synchronous rectifiers in VRM applications
IEEE Power Electronics Specialists Conference PESC, June 2003, vol. 1, p. 144-149

M. Albach, H. Roßmanith, (2003)
Teaching Coupling Mechanisms – A Case Study
IEEE Symposium on Electromagnetic Compatibility, Aug. 2003, Boston, USA, 
vol. 1, p. 160-165

Best Symposium Paper Award
T. Fischer, M. Leone, M. Albach, (2003)
An analytical model for studying the electromagnetic radiation of power-bus structures
IEEE Symposium on Electromagnetic Compatibility, Boston, USA, 
vol. 1, p. 225-230, Aug. 2003

T. Dürbaum, R. Elferich, T. Tolle, (2003)
De-embedding of Reverse Recovery Losses in Fast Switching VRM Applications
18th Annual Applied Power Electronics Conference, APEC 2003

T. Dürbaum, T. Lopez, G. Sauerländer, T. Tolle, (2003)
A Detailed Analysis of a Resonant Gate Driver for PWM Applications
18th Annual Applied Power Electronics Conference, APEC 2003

M. Albach, S. Schuh, (2003)
Analysis of embedded passives integrated circuits for power converters
ZM Communications GmbH Nuremberg, Germany: PCIM Conference, May 2003, 
Nuremberg, Germany, S. Seminar PE 2-1

Leone, T. Fischer, M. Albach, (2003)
Investigation of the radiation from parallel-plane power-bus structures on 
printed circuit boards
Electrical Engineering, vol. 85, Number 2, p. 113 – 118, May 2003

S. Voss, M. Albach, (2003)
Analytical Calculation of Winding Capacitances in Transformers
INTERMAG Conference, March/April 2003, Boston, USA

2002

S. Voss, (2002)
Equivalent circuit modelling for hf-transformers
2nd EPE International Conference on Electrical and Power Engineering, November 2002, 
Buletinul Institutului Politehnic din Iasi, Sectia III (Electrotehnica, Energetica, Electronica), 
vol. C, p. 15-20, Iasi, Romania

S. Schuh, LS. EMF, B. Ackermann, E. Waffenschmid, Philips GmbH, E. Langkabel, 
Isola AG, H. Marczinske, Straschu Leiterplatten GmbH, M. Wille, Ruwel, 
Werk Schöller, Spezialfabrik für Leiterplatten, (2002)
Embedded passive circuits for power converters
International Workshop on Technology and Production Processes for 
Flexible Electronic Systems, November 2002, Munich, Germany

M. Albach, D. Kübrich, T. Brehm, (2002)
Coupling Mechanisms – EMC experiment demonstrations
IEEE International Symposium on Electromagnetic Compatibility, August 2002, 
Minneapolis, USA

T. Dürbaum, R. Elferich, (2002)
A new Load-Resonant Dual-Output Converter Topology
33rd Annual IEEE Power Electronics Specialists Conference, PESC 2002, 1319

T. Dürbaum, (2002)
Design procedure for load resonant converters using integrated magnetics
45th European Conference on Power Electronics, Drives and Motion, PCIM 2002, 341 pp.

T. Dürbaum, G. Sauerländer, (2002)
Description Of Transformer Leakage By Introduction Of An AL-Value
45th European Conference on Power Electronics, Drives and Motion, PCIM 2002, 209 pp.

T. Dürbaum, R. Elferich, (2002)
A New Resonant DC-DC Converter For Consumer Electronic Applications
45th European Conference on Power Electronics, Drives and Motion, PCIM 2002, 119 pp.

M. Albach, (2002)
Design of Magnetic Components
Seminar 21, PCIM Conference, May 2002, Nuremberg, Germany

H. Roßmanith, M. Albach, (2002)
Design of Magnetic Components
PCIM Tutorial 4, March 2002, Shanghai, China

2001

T. Dürbaum, T. Tolle, (2001)
Modelling of ZVS Transitions in Asymmetrical Half-Bridge PWM Converters
32nd Annual IEEE Power Electronics Specialists Conference, PESC 2001, vol. 1, 308 pp.

T. Dürbaum, T. Tolle, (2001)
Modelling of the Asymmetrical Half-Bridge with Single Diode Output
9th European Conference on Power Electronics and Applications EPE, Aug. 2001, 
Graz, Austria

Horst, M. Albach, (2001)
The influence of the non-linear ferrite characteristics on the attenuation of 
power line filters
9th European Conference on Power Electronics and Applications EPE, Aug. 2001, 
Graz, Austria

S. Voss, H. Roßmanith, M. Albach, (2001)
The influence of air gap position and winding position on the inductance in high 
frequency transformers
9th European Conference on Power Electronics and Applications EPE, Aug. 2001, 
Graz, Austria

M. Albach, H. Roßmanith, (2001)
The influence of air gap size and winding position on the proximity losses in 
high frequency transformers
32nd IEEE Power Electronics Specialists Conference PESC, June 2001, 
Vancouver, Canada, paper 10260

T. Dürbaum, G. Sauerländer, (2001)
Energy based capacitance model for magnetic devices
16th Annual Applied Power Electronics Conference, APEC 2001, vol. 1, 109 pp.

M. Albach, (2001)
Design of Magnetic Components
Seminar 24, PCIM Conference, June 2001, Nuremberg, Germany

M. Albach, A. Ortner, (2001)
Optimierte Entstörung für Hörfunkempfänger – Reduzierung von Magnetfeldern durch 
´Buried Jumper´ – Technologie
EMC-Kompendium 2001, publish-industry Verlag, p. 185-187

2000

T. Dürbaum, (2000)
Capacitance model for magnetic devices
31st IEEE Power Electronics Specialists Conference PESC, June 2000, Galway, 
Ireland, vol. 3, 1651 pp.

M. Albach, (2000)
Two-dimensional calculation of winding losses in transformers
31st IEEE Power Electronics Specialists Conference PESC, June 2000, Galway, 
Ireland, paper 41.4, p. 1639-1644

M. Albach, T. Dürbaum, G. Sauerländer, M. Ossmann, T. Tolle, (2000)
Common Mode Noise Generated by Magnetic Components – Experimental Test 
Set-up and Measurement Results
31st IEEE Power Electronics Specialists Conference PESC, June 2000, Galway, 
Ireland, paper 25.1, p. 911-915

T. Dürbaum, T. Tolle, R. Elferich, (2000)
Capacitance Model for Flyback Transformers
41st European Conference on Power Electronics, Drives and Motion, 
PCIM 2000, 361 pp.

M. Albach, (2000)
Design of Magnetic Components
Seminar 25, 41st European Conference on Power Electronics, Drives and Motion, 
PCIM 2000

1999

T. Dürbaum, (1999)
Layer Based Capacitance Model for Magnetic Devices
8th European Power Electronics Conference EPE, Sep. 1999, Lausanne, Switzerland 
published on CD

M. Albach, G. Sauerländer, (1999)
Reduction of magnetic field strength generated by a switched mode power supply
8th European Power Electronics Conference EPE, Sep. 1999, Lausanne, 
Switzerland Session D.3

Dr. Manfred Albach, Dr. Ralf Schäfer, Dr. Hans-Peter Stormberg, Armin Wegener,
Schaltungsanordnung zum Betrieb von Hochdruckgasentladungslampen
DE 3524266
EP 0208370
US 4812736
CA 1294665

Dr. Manfred Albach, Armin Wegener,
Schaltungsanordnung zur Ansteuerung einer kapazitiven Last
DE 3538552
EP 0220779
US 4730123

Dr. Manfred Albach, Armin Wegener,
Schaltungsanordnung zur Erzeugung einer Gleichspannung aus einer sinusförmigen Eingangsspannung
DE 3541307
EP 0223316
US 4719552

Dr. Manfred Albach,
Schaltungsanordnung zur Erzeugung einer Gleichspannung aus einer sinusförmigen Eingangsspannung
DE 3541308
EP 0223315
US 4712169

Dr. Manfred Albach, Hubert Raets,
Schaltungsanordnung zur Verringerung eines in einer Last hervorgerufenen Störstromes
DE 3612378
US 4736152
EP 0241979

Dr. Manfred Albach, Armin Wegener,
Schaltungsanordnung zur Verringerung eines in einer Last hervorgerufenen Störstromes
DE 3612380
EP 0241979
US 4736152

Dr. Manfred Albach, Hubert Raets,
Schaltungsanordnung zur Energieversorgung einer Last
DE 3636346

Dr. Manfred Albach, Dr. Hans-Peter Stormberg, Armin Wegener,
Schaltungsanordnung zum Betrieb von Hochdruck-Gasentladungslampen mittels eines impulsförmigen Versorgungsstromes
DE 3641070
EP 0270183
HU 0197472
HU 0045790
US 5059869
CA 1334681

Dr. Manfred Albach,
Schaltungsanordnung zum Übertragen elektrischer Energie
DE 3722337
EP 0298562
US 4821166
AT 0095351

Dr. Manfred Albach, Hubert Raets,
Schaltungsanordnung zur Speisung einer Last
DE 3830016
EP 0326220
AT 0095350
US 4962349

Dr. Manfred Albach,
Schaltungsanordnung zur variablen Speisung einer ohmschen Last aus einem Wechselstromnetz
DE 3838430

Dr. Manfred Albach, Hubert Raets,
Schaltungsanordnung zum Speisen einer Last
DE 3840304
EP 0371555
AT 00105448
US 4992921
JP 2193569

Dr. Manfred Albach,
Schaltungsanordnung zum Speisen einer Last
DE 3933202
EP 0421534
US 5191226
AT 00104096

Dr. Manfred Albach,
Schaltungsanordnung zum Speisen einer Last
DE 4032943
EP 0481551

Dr. Manfred Albach, Armin Wegener,
Schaltungsanordnung zum Erzeugen einer Speisegleichspannung
DE 4040841

Dr. Manfred Albach,
Schaltungsanordnung zum Speisen wenigstens einer Last
DE 4124616

Dr. Manfred Albach, Theo Hüsgen,
Schaltungsanordnung zum Betreiben einer induktiven Last
DE 4237843
US 5514942
FR 2698499
GB 2272339

Dr. Manfred Albach,
Schaltungsanordnung zum Erzeugen einer Gleichspannung
DE 4339451
EP 0654886
US 5612856

Dr. Manfred Albach, Dr. Thomas Dürbaum,
Schaltnetzteil
DE 4432077
EP 0729667
US 5729447
WO 1996008071

Dr. Manfred Albach, Dr. Thomas Dürbaum,
Schaltungsanordnung zum Erzeugen einer galvanisch getrennten Ausgangsgleichspannung
DE 19513065
EP 0736958
US 5673185

Dr. Manfred Albach, Hubert Raets,
Transformator
DE 19754845
EP 0923092
US 6100781
JP 11243019

Dr. Thomas Dürbaum,
Schaltnetzteil
DE 0019828038
EP 0000967714
JP 2000037074
US 0006084784

Dr. Manfred Albach, Eugen de Mol, Harry Michiels,
Induktives Bauelement mit einem Stabkern
DE 19843415
EP 0989569
JP 114066

Dr. Thomas Dürbaum, Georg Sauerländer, Hubert Raets,
Konverter mit Resonanzkreiselelementen
DE 0019925490
EP 0001063759
JP 2001008444
US 0006381160

Dr. Manfred Albach,
Magnetisches Bauelement
DE 19934767
EP 1071101
JP 1068353

Dr. Manfred Albach, Dr. Matthias Wendt,
Elektrisches Bauelement, insbesondere gewickelter Kondensator
DE 19959933

Dr. Thomas Dürbaum, Georg Sauerländer, Hubert Raets,
Konverter mit Resonanzkreiselelementen
DE 00019961228
DE 00019961227
EP 00001155492
JP 02003517257
US 20020126510
US 00006466456
WO 02001045241

Dr. Thomas Dürbaum, Dr. Peter Lürkens, Jürgen Halfmann,
Netz- oder Ladegerät
DE 00010015885
EP 00001139709
JP 02002008738
US 20010033148
US 00006377021

Dr. Thomas Dürbaum, Jan Mark Smidt Pieter,
Multimode Switched-Mode Power Supply
EP 0001142089
JP 2003510999
US 0006356466
WO 2001022562

Dr. Thomas Dürbaum, Hubert Raets,
Konverter
DE 00010035139
EP 00001174991
JP 02002101654
US 20020012254

Dr. Thomas Dürbaum, Jürgen Halfmann,
Vorrichtung zum Herstellen einer elektrischen Steckverbindung
DE 00010037553
EP 00001178577
JP 02002093511
US 20020022390

Dr. Thomas Dürbaum, Jan Mark Smidt Pieter,
Converter Control
EP 00001329016
US 20020190698
WO 02002035692

Dr. Thomas Dürbaum,
Schaltungsanordnung
DE 00010062980
EP 00001215806
JP 02002204576
US 20020080629
US 00006438001

Dr. Thomas Dürbaum, Reinhold Elferich,
Anordnung mit einem auf einem Träger montierten integrierten Schaltkreis
DE 0010107839
EP 0001362502
WO 2002067646

Dr. Thomas Dürbaum, Reinhold Elferich, Georg Sauerländer,
Schaltung zur Umwandlung von Wechselspannung in Gleichspannung
DE 00010126160
DE 00010108431
EP 00001235338
EP 00001235337
JP 02002291252
JP 02002281759
US 20020154525
US 20020154523
US 00006653822

Dr. Thomas Dürbaum, Reinhold Elferich, Georg Sauerländer,
System zur drahtlosen Übertragung elektrischer Leistung, ein Kleidungsstück
DE 000010119283
EP 000001253695
JP 002002369414
US 020020154518

Dr. Thomas Dürbaum, Dr. Matthias Wendt, Dr. Peter Lürkens, Carsten Deppe, Georg Sauerländer,
Aufwachschaltung für ein elektrisches Gerät
DE 00010106132
EP 00001231698
JP 02002333925
US 20020190797

Dr. Thomas Dürbaum, Georg Sauerländer,
Schaltung zur Umwandlung von Wechselspannung in Gleichspannung
DE 00010118285
EP 00001249923
JP 02002330589
US 20020176269
US 00006594165

Dr. Thomas Dürbaum, Reinhold Elferich, Hubert Raets,
Regelvorrichtung für einen resonanten Konverter
DE 00010152194
DE 00010122534
EP 00001303032
EP 00001257047
JP 02003111408
JP 02002374673
US 20030067791
US 20020186026
US 20020181259

Dr. Thomas Dürbaum, Tobias Tolle,
Spannungswandler
DE 00010128687
EP 00001267476
JP 02003009525
US 20020191420

Dr. Thomas Dürbaum, Jan Mark Smidt Pieter, Tobias Tolle, Dick Domensino,
Transformator
DE 0010132123
WO 2003005382

Dr. Manfred Albach, Dr. Thomas Dürbaum, Dr. Eberhard Waffenschmidt, Dr. Matthias Wendt, Dr. Heinz von der Broeck, Christoph Loef,
Netzgerät
DE 00010139445
EP 00001283587
JP 02003061353
US 20030030421

Dr. Thomas Dürbaum, Tobias Tolle, Jan Mark Smidt Pieter,
Elektrische Schaltungsanordnung
DE 00010133865
EP 00001276218
JP 02003079144
US 20030016546

Dr. Thomas Dürbaum,
Verfahren zur Stromversorgung von Stromverbrauchern mit niedriger Versorgungsspannung
DE 0010149278A1
WO 2003032104A2

Dr. Thomas Dürbaum, Reinhold Elferich, Georg Sauerländer,
Gleichspannungswandler und Regelverfahren hierfür
DE 00010143169
US 20030043599

Dr. Thomas Dürbaum,
Verfahren zur Stromversorgung von Stromverbrauchern mit niedriger Versorgungsspannung
DE 0010162274
EP 0001329786
JP 2003204669

Dr. Thomas Dürbaum,
Verfahren zum Betreiben eines Schaltnetzteils und Schaltnetzteil
DE 0010217481
WO 2003073594

Dr. Thomas Dürbaum, Thomas Vollmer, Carsten Deppe,
Kopplungsmodul für ein Netzwerk
DE 0010216115
WO 2003077475
WO 2003077443
WO 2003077442

Dr. Thomas Dürbaum,
Schaltungsanordnung für einen resonanten Konverter und Verfahren zu dessen Berieb
DE 0010221450
WO 2003098790

Dr. Thomas Dürbaum, Tobias Tolle, Reinhold Elferich,
Vorrichtung mit einer Schaltungsanordnung mit induktivem Element
DE 000010234081

Dr. Thomas Dürbaum, Tobias Tolle, Reinhold Elferich,
Gleichspannungsabwärtswandler
DE 000010234080